HATHOR: LED Exterior Wall & Bollard Lights IP54

Product Features:

• Input voltage: 100-240V AC 50/60Hz
• Inbuilt constant current driver included
• Driver output voltage: 18-42V
• Driver input current: 0.065A
• Driver output current: 300mA
• Housing & heatsink: powder coated-aluminium
• Diffuser: PC
• HATHOR1 back plate: PC
• HATHOR2 & 3 surface mounting plate: die cast aluminium 
• Power factor: >0.5
• Lifetime: 30,000hrs
• Ambient Temp: -20 to +50°C
• Not suitable for use with dimmers
• Suitable for 2-way switching
• Suitable for use with PIR or Microwave sensors
• IP rating: IP54
• NOTE: HATHOR2-3 are not for use inground
• For bollard lights, to maintain the IP rating please use circular cable in junction
• For bollard lights, for parallel and single connection we recommend using an appropriate IP68 connector (CLA Connector: CONN001 & CONN002)

*Must be installed by a licenced electrician (Installation instructions sheet provided in each product box).

*These bollards are designed for mounting on a solid surface such as a concrete path or sturdy timber decking.

*Unless protected, not recommended for environments with harsh weather conditions or heavy rainfall. IP65 fittings recommended for such environments. To avoid disappointment and warranty problems, please ensure the IP rating of the chosen product is relevant for the intended use.

Warranty

3 year replacement warranty

Part No.

HATHOR1, HATHOR2, HATHOR3

 Brochure          Technical Spec

 SDoC