Part | Description | Kelvin | Lumens | Watt | CRI | Beam | Dimm | Length(mm) | Width/Diam(mm) | Depth(mm) | C/out(mm) |
OTTER1 | DRIVER LED 12V DC CONSTANT VOLT 1-12W Min 1.2W Max 9.6W | 12 | - | 65 | 29 | 20 | |||||
OTTER2 | DRIVER 12V DC C/VOLT 20W (2W - 16W) RECT IP67 LED | 20 | - | 132 | 30 | 20 | |||||
OTTER3 | DRIVER LED 12V DC CONSTANT VOLT 50W Min 5W Max 40W | 50 | - | 178 | 71 | 46 | |||||
OTTER4 | DRIVER LED 12V DC CONSTANT VOLT 100W Min 10W Max 80W (40W Per Cable) | 100 | - | 178 | 71 | 46 | |||||
OTTER5 | DRIVER LED 12V DC CONSTANT VOLT 150W (Load Min 15W Max 120W) | 150 | - | 210 | 71 | 46 | |||||
OTTER6 | DRIVER 12V DC C/VOLT 200W (20W-160W) RECT IP67 LED | 200 | - | 240 | 71 | 48 | |||||
OTTER7 | DRIVER LED 12V DC CONSTANT VOLT 300W Min 30W Max 240W (120W Per Cable) | 300 | - | 275 | 95 | 50 | |||||
OTTER8 | DRIVER 12V DC C/VOLT 30W (3W-24W) RECT IP67 LED | 30 | - | 182 | 30 | 20 |
This driver is manufactured with a split cable format for carrying increased current for easier connection of multiple loads
Each driver can be used:
● At full load capacity by connecting all cables to one terminal block
● With any combination of split cables (as long as the minimum and maximum loads below are adhered to)
FULL load capacity CANNOT be connected to one cable
Technical Spec:
OTTER1:
OTTER2:
OTTER8:
OTTER3:
OTTER4:
OTTER5:
OTTER6:
OTTER7: