|CLA1110011||DRIVER LED 12V DC CONSTANT VOLTAGE 100W (2x50W) IP67 W/PROOF||100||-||190||68||53|
|CLA111011||DRIVER LED 12V DC CONSTANT VOLTAGE 10W IP67 W/PROOF||10||-||120||29||21|
|CLA1120011||DRIVER LED 12V DC CONSTANT VOLTAGE 200W (4x50W) IP67 W/PROOF||200||-||235||132.2||65|
|CLA113011||DRIVER LED 12V DC C/VOLT 30W IP67 WP||30||-||182||30||20|
|CLA115011||DRIVER LED 12V DC CONSTANT VOLTAGE 50W IP67 W/PROOF||50||-||178||68||53|
Minimum load is 10% of rated power
Maximum load is 80% of rated power
For CLA115011, CLA1110011 and CLA112011
These drivers are manufactured with a split cable format for carrying increased current for easier connection of multiple loads
Each driver can be used:
- At full load capacity by connecting all cables to one terminal block
- With any combination of split cables (as long as the minimum and maximum loads above are adhered to)
FULL load capacity CANNOT be connected to one cable.
*Must be installed by a licenced electrician (Installation instructions sheet provided in each product box).